Instinct/Altitude PowerPlay A30/A50/A70/C70/C90

Derestriction type
Mechanical
Hub
DT Swiss
Shimano MT400
Shimano MT410/510
Hope Pro4
Other
Any hub with a simple 19 mm diameter end cap profile (Roval, DT Swiss, Syntace, Stan's NEO).
Brake disc
Stock
Hope Floating
Shimano XT
Magura
Whatever brake rotor comes stock on the bike. For Centerlock hubs the rotor doesn't matter because PLANET3 goes on the lockring that will be sent with the device.
Configuration
Dual
Not dual but 6 planet config for 2022 bikes.
instead of 130,00 
New icon
New
130,00 
Availability: In stock

Shipped worldwide via:

DHL Shipping - PLANET3

Do you have any questions about the product?

Don't hesitate to contact us before your purchase!

Description

VERY IMPORTANT: On 2022 Rocky Mountain e-bikes the spacing in the rear is decreased due to the design of their new sensor carrier. This means that in order to fit the PLANET3 you will have to sand/file some of the material from the back of the sensor (let’s say around ~1mm of sensor thickness. This does not affect the operation of the sensor in any way and is not something that is likely to be noticed by any bike shop. However, it is an invasive modification into a new bike, so PLEASE do not purchase the PLANET3 if you are NOT OK with doing this. Another solution would be to simply buy a spare sensor if you’re worried as they’re always rather cheap (~20-30 EUR/USD).


For 2022 Rocky Mountain e-bikes which feature 3 magnets on the rear hub by default – a 6 planet configuration is mandatory. This means the ratio of the device is 1,5:1 compared to the stock configuration. Speed increase is 50% (~38 km/h for EU, 30 mph for US) and there’s no errors while pedaling slowly on steep uphills (at least none reported, yet).


Last but least, this is obviously a single product link covering all 2022 bikes. This means they all use the same size PLANET3 but the differences are in the hub attachment types. So, PLEASE make sure to go look at your bike’s rear hub on the braking side, COMPARE with the photos in the gallery here and then order appropriately. The bike will either have a Shimano Centerlock rear hub OR a DT Swiss 6-bolt hub. However, when it comes to Shimano hubs the A30 model is listed as having a regular MT400 which has the wrench flats in the way and requires an end cap replacement (that I produced), while the MT410 and MT510 which have the wrench flats at the very start of the end cap are fully compatible just as they are. This is IMPORTANT, so don’t fuck it up. Remove the rear wheel from the bike, take a photo of the orange circled area and send it to me if you are unsure what you have or what you need to order.

Description

Features

Features

Contents

1 x PLANET3 device consisting of sun gear, ring gear and 6 planet gears

3 x M5x10 ISO 14580 bolt with pre-applied Loctite 268

1 x Planet spacing tool for 2022 RM (6 magnets)

6 x 10x1 mm magnet for position checking after installation. DON'T LEAVE THESE on the goddamn device.

Contents

Do you have any questions about the product?

Don't hesitate to contact us before your purchase!

Thank you for your order! Please check your email inbox in a few minutes for the order confirmation and click bellow to visit the installation instructions. If you haven't receveid an email with your order ID and relevant information, please contact us via email!

Product added to cart!
Go to cart
Your shopping cart is updated!

Use the filters

Make your life easier with the help of filters on the . Simply select the manufacturer, model and year.

Use the filters

Make your life easier with the help of filters on the . Simply select the manufacturer, model and year.