Turbo Kenevo SL S-Works

Hub
Stock (Roval/DT Swiss)
Other
Roval/DT hub that comes stock on the bike. See picture in the gallery for reference!
Brake disc
Stock
Hope Floating
Shimano XT
Magura
Magura MDR-C flat one-piece steel rotor (2,00mm).
Configuration
Dual
Two planets inside the device means half the ratio and half the speed increase (~38 km/h/23,6 mph instead of ~76 km/h/47,2 mph for EU/UK spec bikes). This is not necessary for Specialized (at the moment), but might be in the future.
instead of 120,00 
New icon
New
120,00 
Availability: In stock

Shipped worldwide via:

DHL Shipping - PLANET3

Do you have any questions about the product?

Don't hesitate to contact us before your purchase!

Description

PLANET3 is a planetary gear set which reduces the rotation speed of the magnet used by the wheel speed sensor three times. For every three full rotations of the rear wheel, the magnet completes just one full rotation – effectively making the bike think it’s doing 1/3 the speed it is actually doing, thus increasing the pedal assist speed limit by a factor of 3. For the Specialized models sold on EU/UK market this translates into a speed limit increase from 25 to 75 km/h (15.5 to 47 mph), while the US and Canada models limit is raised from 20 to 60 mph.

For the Kenevo SL a dual planet configuration will be default in order to be more future-proof since Specialized is constantly messing around with walk mode which also affects PLANET3 functionality on some bikes. Currently, even with the most recent motor firmware (version 7.4.2. – May 2021) the 2022 model bikes work with a 3:1 (single) planet configuration so you can still get a full de-restriction of the speed limit. However, if there are any speed sensor errors during low-speed pedaling (climbing slowly in low gears) – please try a dual planet configuration which brings the ratio down to 1,5:1 (halves it) making your speed limit ~38 km/h but bringing the rear wheel rotation speed closer to the “realistic” range which the motor would expect with a future version of the “anti-PLANET3” firmware.

Description

Features

Features

Contents

1 x Gen3 PLANET3 device (different to other models!) consisting of sun gear, ring gear, two planet gears (with an N52 magnets) and external, position-checking magnets.

3 x M5x10 ISO 14580 bolt with pre-applied Loctite 268

Contents

Do you have any questions about the product?

Don't hesitate to contact us before your purchase!

Thank you for your order! Please check your email inbox in a few minutes for the order confirmation and click bellow to visit the installation instructions. If you haven't receveid an email with your order ID and relevant information, please contact us via email!

Product added to cart!
Go to cart
Your shopping cart is updated!

Use the filters

Make your life easier with the help of filters on the . Simply select the manufacturer, model and year.

Use the filters

Make your life easier with the help of filters on the . Simply select the manufacturer, model and year.